All Products

Taper Self-aligning Idler Roller

Conical rollers are suitable for both trough carrying aligning idlers and return aligning idlers. 1、The taper aligning roller adopts high-precision special steel pipe to ensure the low vibration and low noise of the roller, effectively reduce the...

Steel Pipe Carrier Roller Diameter 194

Tube: Q235B high-precision ERW seam carbon steel pipe with roundness and straightness to ensure well-balanced rotation. Shaft: 45# steel(GB) or equal, accurate shaft are made of cold-drawn bright round steel, which is superior in corrosion...

Double Taper Rolls Self Aligning Idler Set

1、Application ● TS-CJP/RJP type double cone automatic correction Idler device is suitable for automatic correction of belt conveyor, they are consist of two cone rollers and one smooth roller, it is a device component to support the conveyor belt...

Friction Reducing Core Idler

The friction training idler set can provide the belt deviation correction function for the bidirectional belt conveyor in the forward and reverse transportation. At the same time, when the belt runs off, the rollers rotate at an appropriate angle to...

V type Self Aligning Return Idler

The commonly used deviation correction device is a differential aligning roller, whose principle is that when the belt runs off and the edge contacts the side roller, the entire aligning bracket is forced to rotate an angle, so that the belt returns...

DW Type Motor Push Rod

Working Principle DW Motor Push Rod power from motor and is drove trapezoid screw nut transmission-counter by decelerator to transform motor circular movement into linear motion. DW motor push rod enjoys high-effective self-locking function. Under...

DT Type Motor Push Rod

1、Structure ● DT motor push rod is made of 1-motor, 2-Reducer, 3-trapezium nut transmission countershaft, 4-push rod, 5-flexible protective cover etc. 2、Technical Parameter (Based on different specification) Description：Motor Push Rod Type：DT...

DG type Screw Motor Cylinder

DG motor push rod is also a common model, its characteristics are as follows: 1. General Model DGbm motor push rod is a new generation of electric actuator and adopted to instead of manipulator, hydraulic pressure, pneumatics and other drive device....

XDT Electric Motor-Driven Push Rod

1. Application ● Motor Push Rod is safe, reliable, liner driving device. Its working principle is that transforming motor circular movement into linear motion by screw rod and ball screw. This XDT Motor Push Rod can displace hydraulic oil cylinder...

Trough Carrying Idler Frame

1） Trough frame for bearing roller fixed conveyor belt role, bracket is divided into various models, such as trough aligning frame, trough forwarded bracket, trough bracket, trough impact idler bracket and so on. They can be applied to different...

30° Transition Idler for Conveyor

Transition idler: It is installed between the drum and the first set of idler, and can gradually turn the conveyer into trough shape, or expand the conveyer from trough shape, so as to reduce the additional stress generated from the expansion of...

20° Transition Idler for Conveyor

The transition idler set is arranged between the tail pulely and the ordinary trough idler set to reduce the stress on the edge of the conveyor belt and avoid the occurrence of scattering. According to the trough angle is divided into 10°, 20°, 30°...

Steel Pipe carrying idler Roller φ89

Trough rollers are steel rollers that are widely used in the environment with large dust and high corrosion in the open air, such as mines, power plants, steel mills, stone factories, cement factories, coal washing plants, salt plants, alkali...

Steel Pipe Trough Carrying Idler Rollerφ159

The smooth roller is the spare parts of trough carrying idler, transition idler, training idler, they are made of Q235 or Q235B high-precision ERW seam carbon steel pipe, cold-drawn bright round steel shaft Q235 or 45#, domestic famous brands...

Friction Self-aligning Belt Conveyor Idler

As a kind of self aligning idler, friction aligning idler plays an important role in belt correction. After the friction roller assembly, the roller has good strength, small meridional runout, small rotating resistance, light weight, low energy...

Impact Idler for belt width 1400mm

The Material of impcat Idler: Rubber and Steel. Structure: installed on the material-feeding spot to reduce the impulsive force. The Impact idler is the part used to support belt and material loaded on the belt conveyer. The characteristic of impact...

Conveyor Carrying Impact Idler B1200

Impact idlers are used to slow down the impact of blanking on the conveyor belt at the material place of the belt conveyor, mainly for the coal washing plant, coking plant, chemical plant and other corrosive environment and developed a class of...

Impact Idler for Belt Width 1600

The impact idler is installed under the conveyor receiving section to reduce the impact of the conveyor belt and extend the service life of the conveyor belt. impact idler life is five times that of traditional roller, corrosion resistance, flame...

Belt width 800 Carrying Impact Idler

Conveyor carrying Impact idler have rollers made of a resilient rubber material. Impact idler is used to absorb the shock of loaded material from chute at loading and transfer point, so as to protect belt from damage or deterioration. In order to...

Trough Idler for Belt width 1400

The trough carrying idlers are engineered to meet or exceed CEMA B, C, D or E standards and feature an interference fit between the shaft and the bearing for improved sealing, better stability and longer life. Specification: For Belt Width:...

Trough Carrier Idler Garland

Idler garland with the equal length rollers adapt to a wide range of belt width. For example, 450mm roller, two sections can be strung into a V-shaped roller group; Three sections of adaptive belt width 1000mm-1200mm; Four sections suitable for belt...

Conveyor Impact Garland Suspended Idler

The characteristics of the Idler garland: 1) it has strong neutrality, and the idlers of the garland roller set are flexibly connected to each other, and the conveyor belt and the materials on it can automatically return to the center line of the...

3 Rollers Suspended Trough Garland Idler

The carrying garland idler is generally three or five rollers, the more the number of rollers, the better the flexibility, the better the arc. The suspended idler is easy to disassemble and suitable for use in small spaces. High conveying capacity...

Lagged Roller Garland Suspended Idler Sets

3 roll suspended trough roller garland idler for conveyor 1） The structure of the garland idler group is flexible connection between its components. The roller group can be connected with rigid frame such as channel steel and steel pipe through the...